All About Backlink

Blog - Tips&Tricks - Apps

There are a lot of things that you need to consider if you want to buy the best headphones for working out. When you are able to pick up the best pair available on the market which also suits your taste of music and your preference, you will be able to experience good music and then be more focused on your intensive workouts. In case you are searching for a pair of headphones as well, here is the list of all the things that you need to look at.

How to Choose a New Headphones For Working Out

1. Types Of Headphones

In general, there are 2 types of headphones which are available to you including Earbud Headphones and General Overhead Headphone. Both of these types have their own pros and cons.

A pair of overhead headphones is such a stylish item to bring around with you when you go to the gym. There are a lot of options that comes along with an overhead headphone. You can buy in with wire and cord or buy a wireless one whichever you prefer.

If you have an intensive workout, you will be able to have full flexibility wearing the wireless type of headphone. However, if you often run, a pair of overhead headphones will be able to stay on your head better. However, an overhead headphone is typically very large, which might take up a lot of space in your gym bag. Also, you might feel tired if the headphones are also heavy.

On the contrary, earbuds allow you to bring them easily and store them anywhere in your bag. You can easily find a lot of different models and brands pf earbuds on the market with an affordable price, which is normally cheaper than a pair of overhead headphones with the same specifications.

2. The Frequency Range

headphone for working out

You will need a pair of headphones with a wide frequency range if you want to listen to various notes from high to low notes. However, you can also consider a frequency range with extension to the lower end if you want to hear a lot of bass notes. When you listen to music when you work out, most of the work out songs tend to have a large amount of bass notes and bass sounds, which you should take into consideration.

Don’t waste money on buying a pair of headphones which a really wide range of frequency as normal people can only hear the sounds coming from the frequency range of 10 Hz to 25000 Hz. Any note which is higher or lower than that could not be heard.

3. The Price

The last thing that you need to take into consideration is the price of a pair of headphones you are willing to pay for. Like any other product on the market, you are going to get what you have already paid for. It means that in most of the case, the high-quality headphones are more expensive. But in turn, they would be able to deliver high-quality music, better construction and would simply last longer.

headphone for working out 2

Keep in mind that some people and manufacturer consider a pair of headphones as a personal stylish item. Therefore, they focus more on the design and brand name of the headphones rather than the product themselves. On this case, when you pay a high price for this product, you are paying a high amount of money for the brand name.

You should never go for a cheap deal when you buy a pair of headphones. If you want to continue using it for a long time, you should look for ones which are more durable- hence more expensive. In addition, a cheap pair of headphones tends to deliver a poor quality of sound of music and will surely damage your ears if you are going to listen to music with it for a long time.


Here are some of the most important features that you need to consider when you want to buy a pair of headphones. You need to consider which type would suits your needs the most, which frequency and height of notes you are most comfortable with and most importantly, how much you can pay for one.

When you come to the store and browse for a pair of headphones which meets all of your requirements above, you should finally test it by wearing it on to check if you are comfortable with its design and its weight or not. With careful consideration and thoroughly research, I think what you would be able to find a good pair of headphones so that you can listen to good music and make your investment worth every penny of it.

See more: How to Take Pictures With an Instant Camera

Read More

This article, we want to show you how you can get the latest working Snapchat hacks on iOS 11 devices without Jailbreaking it. It’s a pretty simple process, and you just follow a few steps. Here are step by step for geting this job done.

Snapchat hacks on iOS 11 devices without Jailbreaking

Snapchat hacks

The first thing, you will need to open the Safari and go to the link here. Once you open the link, the web page will appear.

Click on the Download button the get the TweakBox app. When you have completed, let open the TweetBox which installed on your device. Here, it’s pretty simple to go ahead and install these hacks for Snapchat. You can tap on the button and scroll down to install the Crash Sticks, just wait for it to install.

Then open the Setting >> General >> Tap on Profiles and Device Management, then tap Winner Media >> Trust “Winner media a Co.”

Go back the TweetBox app, tap on Apps tab and scroll down and tap on Tweaked Apps (Snapchat icon). Select the Snapchat Phantom and tap on Install button.

Now you can open Snapchat Phantom and log in your Snapchat account and here you will have all the cool features. That are set a time if you need to take a picture, upload the image and video directly to your device, the stealth mode will enable a feature which allows you to watch people’s stores without them knowing that you have watched them and save snapchat video to your device quickly.

It also has an extra options at the Phanton’s configuration, you can see all the options as you can configure using phantoms such as:

The feed options story, tap to Advance, Disable Hold to View, Hide Discovery,…


Snapchat Phantom which is a pretty cool app which allows you to have all these awesome cool hacks on your Snapchat and let me know if you know some other great tricks via a comment below.

Read More

In modern times, the art of instant photography does not cease to exist. The nostalgic feeling from instant photos still attracts many people to pursue this art. Not to mention that nowadays it is not difficult to find an instant camera and instant film.

Even in a big supermarket or a nearby camera shop, you can easily buy an instant camera that is suitable for your budget and your needs. Modern instant cameras are also easy to use. Besides, most of them are small and have lightweight; which make them very portable. Once you have purchased an instant camera for yourself, now it is time to take photos.

1. Choose the Correct Film and Load It into the Camera

If you buy a new Fujifilm Instax or a Polaroid 300 Camera, the search for the suitable film for them is very easy. The film is widely available and the price is also very reasonable. Mostly the camera is sold with a cartridge of the film as a promotion gift. If you do not get this offer, then you can buy film separately. It is not costly.

In case you decide to go with classic Polaroid cameras, the search for a film may be a little more complicated, yet it is not impossible if you know where to look. Once you have gotten the camera and its film in your hand, load the film cartridge into the camera. Do this carefully. Look at your cartridge of film. There is a black piece of paper or plastic on top of it. This thing is called the dark slide of the cartridge. It protects from a film from the light.

When you load your camera, remember not to touch this dark slide on top of the cartridge or else your film will be exposed to the light and be damaged. After you successfully load the camera, the dark slide will be ejected automatically and the film is ready to be used.

2. What to Notice When Taking Instant Photos

camera instant exp

The experience with the instant camera is usually very exciting, especially for beginners. Just press the button and a photo will immediately slide out of your camera. There are not too many rules to follow here. Instant photography is more about your mood and feeling than techniques and rules. However, if you use Polaroid film, there are still a few things that you may want to keep in mind when taking instant photos with it. It is essential to know that Polaroid film needs to be covered from the light in order to develop well.

The developing process takes around 90 seconds to 3 minutes (some films even require as much as 10 minutes). When the picture is first ejected from the camera, it needs to be covered right away to give it a “dark room” to develop. If you are going to shoot under the bright sunlight, let think of how to cover the film before actually starting to shoot.

There are cases when the photos are “burnt” due to being exposed to light too soon after they are ejected from the camera. During the development, the photo may not look like what you have tried to capture. Do not worry about this, be patient and wait for a process to finish. Only after the photo is fully developed that you can see the sight you have taken.

3. Know the Limits of Instant Photos

While the instant photography is pretty enjoyable, it has some limits. The colors of instant photos are typical. This is a special feature of instant photography and many people love it endlessly.

If you do not belong to this group and you find the colors of instant photos are not bright enough for your taste, then the sad news is you cannot change this. So when you decide to go with instant photography, you need to accept its typical colors and style.

The sharpness of instant photos cannot match with ones you take using other types of camera. Instant photos are for quick snapshots, not a detailed and sharp artwork. Do not expect a clear landscape in great details in an instant photo or else all you get is a disappointment.

Instant photos have the tendency to blur, especially when you stand too close to the object. So you should better keep a good distance with the thing you want to shoot.

See more: Ultimate Guide On Buying the Best Camera for Recording

Read More

Do you know that electronics consume a signification amount of energy every day? In fact, just computers and WiFi routers can make up about 20-25% of your energy bill. With rising energy prices, it is best to learn how to use electronic efficiently to save cost. You can do so easily with the following tricks which cost you very little to no money

1. Shop for Electronics With the ENERGY STAR Logo

One first tip should be about getting products with the blue ENERGY STAR logo on them. They are designed with the latest technology to save energy cost and contribute to protecting the environment. It is said that they can save at least 40% of energy compared to normal models. But even with these energy-star certified products, you can still waste energy. So, letís move on to other tips.

2. Turn Them Off When Not In Use

How many times have you pushed the Standby button rather than turned off your TV completely? In fact, electronic in the standby mode still consume energy. The best way is to unplug your devices when not in use. Even with your charger, unplug it from the power outlet when you donít use it to charge anything or you will still find it warm.

After finish charging, you need to remove your devices; or else, it is not just about wasted energy, even the battery can be damaged.

3. Use the Computer’s Power Saving Mode

Computers can consume a large amount of energy. The good news is, it always had power options for you to choose from. You can control the display screenís brightness and set the sleep mode when the computer is in its idle state. With that, you can save about 50% of energy.

When you are out for a while, at least hibernate your computer first. The best option? Shut your computer down.

4. Opt for a Laptop Instead of a Computer

If you have a choice between buying a computer or a laptop, it is recommended that you choose a laptop instead. It consumes less 50% of energy than a computer.

5. Adjust the TV Brightness

With a simple action, you can save about 15% of energy each time you use the TV: reduce its display screen brightness a little bit.

6. Use the Power Strip

As mentioned in track number 2, electronics consume energy even when they are not it use. You want to turn them off but hesitate because you have to walk up to different locations. Don’t be a worry, and you can solve the problem just by using a power strip with an on/off remote switch. It allows you to turn off all electronics with one click.

Take note that you need to re-program home entertainment equipment like DVR or TV when you turn the switch back on. To deal with this, you should plug them into a separate power strip that is turned off only when necessary. The power strip itself is not expensive, but it can help you save hundreds of dollar/year.

7. Monitor Power Consumption

If you want to know the exact amount of energy each electronic device in your house consumes, you can use an inexpensive power meter. Or, a more advanced option is using a whole-house energy monitor. Such device may help you decide if it is time to switch to a more energy-efficient model for a particular electronic device.

Read More

Hello everybody, today we have a really quick look at this program CleanMyMac is also a PC version available and what this program does is it goes through some of your old files and some hidden files and sort of getting clouded up over time.

Just tries to free up some space for so let’s see how effective it is a quickly go into my settings about storage. It’s CleanMyMac of MacPaw.

What’s New of The CleanMyMac 3?

cleanmymac 3

You can see I’ve used about half of my heart of my disk 1.57 GB free so let’s see how much of that space can clean up the soft having the computer for about six months using different programs what disorders are going click scan announcement is always different things censored.

Some of the photos miles, music folders over things in your trash bins and it also recommends some larger on some older files that you may forget about that you can clean up.

cleanmymac review

It’s not to delete any of your falls are important things lost before, so let’s see how much space we can claim arrived and went back in that whole process took about eight minutes in a very long ago.

You can see it’s found over 1.57 GB of a daughter and says it can be removed without any lost your system product daughter. So that’s good to know your head here and click claim insurance also for the minister’s can go ahead.

How to Use The CleanMyMac 3

With the Scan, clean up old to go outside about 5 minutes and that’s about average because I did this to our model older Macs create about 25GB in about half pretty good and conceals on the left is as large an old false signals to manually.

Go through some of the falls may forget about and clear them as well as is about to give us a marketer and have looked at that as well now as for price was for one license to do this one.

cleanmymac 3

It cost about $50 for two computers which is one are selected it. I think it’s a little bit pricey for the first option, but if you get the two computers about $40 each, it’s not too bad especially when it’s such a quick and easy program to use it really does cite requirement of space.

Buy CleanMyMac Now


I hope you enjoy this really short look at CleanMyMac 3 and leave me comments below if you have any other programs, you are choosing to does a similar thing or questions comments concerns rating and also leave the website links and going click check out the program along as well thanks reading everyone.

If you want to see more details about CleanMyMac feature, you can click here.

Read More

Pin It on Pinterest